Mounting hardware

Can't find that hard to find part. Post your needs here.

Mounting hardware

Postby Ivabiggun » Tue Dec 20, 2011 1:02 am

I hope this is the right forum to ask this. Can someone tell me the sizes of the mounting hardware needed to build the Marshall clones? I know that I need #'s 4, 6, & 8 machine screws, but I don't know the correct lengths. For example what length do I need for the 9 pin socket mounting screws and the board mounting screws? I will probably order them from McMaster-Carr but I haven't built an amp in over a year at least and I have forgotten the sizes. Thanks in advance for the help.

Ivabiggun
Ivabiggun
 
Posts: 11
Joined: Mon May 09, 2011 4:22 pm

Advertisement

Banner ads are available for $25 a month. PM or Email me at Info@wallaceamps.com for more details.

Re: Mounting hardware

Postby David B » Tue Dec 20, 2011 1:58 pm

Can't remember off the top of my head though you could get the right parts from Valvestorm and any other bits you might need.

David
User avatar
David B
 
Posts: 798
Joined: Fri Jun 06, 2008 9:31 pm
Location: Rockville CT

Re: Mounting hardware

Postby David B » Sun Jan 15, 2012 1:08 pm

FWIW on my last project I used #4 at 1/4" for the nine pins and #6 at 3/8" for the octals & the board standoffs are #4 at 1-3/16"
User avatar
David B
 
Posts: 798
Joined: Fri Jun 06, 2008 9:31 pm
Location: Rockville CT


Return to Wanted

Who is online

Users browsing this forum: No registered users and 1 guest


cron