Wanted: Offset box, chassis, and faceplates

Can't find that hard to find part. Post your needs here.

Wanted: Offset box, chassis, and faceplates

Postby stubbyfex » Tue May 21, 2013 2:59 pm

Hello!
I just joined this forum, and wanted to say hello.
I'm interested in building an Offset amp, as close to original as possible, with the exception of an IEC power socket.
Can anyone help out with these items? I need a cabinet, chassis and faceplates.
Thanks very much.

Here's one of my other builds:


Image
stubbyfex
 
Posts: 2
Joined: Tue May 21, 2013 12:55 am

Advertisement

Banner ads are available for $25 a month. PM or Email me at Info@wallaceamps.com for more details.

Re: Wanted: Offset box, chassis, and faceplates

Postby Brian Wallace » Tue May 21, 2013 8:05 pm

Check with Graydon at http://gdsamps.com/, he used to sell an offset kit and may have some parts.

Nice amp by the way, a banner would look good on the forum if you would like to promote your amps here. :wink:
Remember....You can fix it with a little extra energy and a positive attitude. ;)
User avatar
Brian Wallace
Site Admin
 
Posts: 1087
Joined: Fri Jun 06, 2008 7:34 pm
Location: Livonia, Michigan

Re: Wanted: Offset box, chassis, and faceplates

Postby stubbyfex » Wed May 22, 2013 5:26 pm

Thank you for the quick reply!
Yes, Graydon at gdsamps has the exact chassis for the offset JTM45.
He also said that Swanson Cabinets could make the box.
I'll need to check with Graydon first, but I'll be getting the iron from Marstran.
Thanks again for all your help.
stubbyfex
 
Posts: 2
Joined: Tue May 21, 2013 12:55 am

Re: Wanted: Offset box, chassis, and faceplates

Postby Brian Wallace » Wed May 22, 2013 10:06 pm

Your very welcome Stubbyfex. :)
Remember....You can fix it with a little extra energy and a positive attitude. ;)
User avatar
Brian Wallace
Site Admin
 
Posts: 1087
Joined: Fri Jun 06, 2008 7:34 pm
Location: Livonia, Michigan


Return to Wanted

Who is online

Users browsing this forum: No registered users and 1 guest


cron