Open Frame Choke from the 70's.
A 1990 choke from a reissue JTM45.
A 2007 choke from a BB reissue.
Marshall Choke Values
3 posts
• Page 1 of 1
Marshall Choke Values
by Brian Wallace » Sat Feb 20, 2010 11:03 am
Here are some values measured on various chokes used in Marshall amplifiers over the years. These are random chokes and were not picked for there value.
Open Frame Choke from the 70's.
A 1990 choke from a reissue JTM45.
A 2007 choke from a BB reissue.
Open Frame Choke from the 70's.
A 1990 choke from a reissue JTM45.
A 2007 choke from a BB reissue.
Remember....You can fix it with a little extra energy and a positive attitude. 
-
Brian Wallace - Site Admin
- Posts: 1090
- Joined: Fri Jun 06, 2008 7:34 pm
- Location: Livonia, Michigan
Advertisement
Banner ads are available for $25 a month. PM or Email me at Info@wallaceamps.com for more details.
Re: Marshall Choke Values
by Brian Wallace » Wed Jun 27, 2012 3:42 pm
Just measured the choke on a 1989 Marshall 2210 100W. The choke number is DE C-3064J and it measured 3H @ 104.7 ohms. Looks the same as the 1471-263 and the D2475.
Remember....You can fix it with a little extra energy and a positive attitude.
-
Brian Wallace - Site Admin
- Posts: 1090
- Joined: Fri Jun 06, 2008 7:34 pm
- Location: Livonia, Michigan
Re: Marshall Choke Values
by Brian Wallace » Sat May 12, 2018 5:06 pm
Another for the list, a 352-114 Drake choke.
Remember....You can fix it with a little extra energy and a positive attitude.
-
Brian Wallace - Site Admin
- Posts: 1090
- Joined: Fri Jun 06, 2008 7:34 pm
- Location: Livonia, Michigan
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests
