Page 1 of 1

Marshall Choke Values

PostPosted: Sat Feb 20, 2010 11:03 am
by Brian Wallace
Here are some values measured on various chokes used in Marshall amplifiers over the years. These are random chokes and were not picked for there value.

Image
Open Frame Choke from the 70's.

Image
A 1990 choke from a reissue JTM45.

Image
A 2007 choke from a BB reissue.

Re: Marshall Choke Values

PostPosted: Wed Jun 27, 2012 3:42 pm
by Brian Wallace
Just measured the choke on a 1989 Marshall 2210 100W. The choke number is DE C-3064J and it measured 3H @ 104.7 ohms. Looks the same as the 1471-263 and the D2475.

Re: Marshall Choke Values

PostPosted: Sat May 12, 2018 5:06 pm
by Brian Wallace
Another for the list, a 352-114 Drake choke.

Image
Image